KnowledgeBase | PC361 | Audio Output


Routing Programs to the Auxiliary Outputs

Question:
How do I route select programs to the Aux outputs?

Answer:

By default all factory Programs are routed to the primary, Main L & R Outputs. The PC3, however, features a secondary pair of analog outs named "Auxiliary" (Aux) that you can reroute signals to as needed.

Here are the basic steps for routing an entire program to the Aux/Secondary outputs:

  1. select desired program (in Program Mode)
  2. press Edit. You will see something similar to:
  3. press [<more] 3 times
  4. press [PROGFX]
  5. the "Output" routing parameters are in upper right hand corner of display. There are separate controls for the insert effect path and the two Aux Returns. Set all in-use FX busses to "Sec.".

    (note in the example here Aux 2 is unused so no need to reroute it)

  6. Exit and save the program

Done.


Need more info? Check out the following links: