Question:
How can I adjust the instruments touch sensitivity?

Answer:

(manual ref. see “Function / Select Mode”.)

To set the keyboard’s “Velocity Sensitivity” parameter:

1. 1. Press the Select button. The button light will illuminate.

1. Per the diagram below, strike a piano note from C#1 to D#2 to select one of the Touch Maps, 1-7:

Map 1 has the greatest dynamic range (allows for harder/heavier playing style). Map 7 has the least dynamic range (allows for easier/lighter playing style). The default selection is Map 4.

The Keyboard Touch setting is retained when the power is off.

Question:
How can I restore my Mark 3 to its factory defaults?

Answer:

There are two methods:

Method 1:

1. Press the Function/Select button
2. Strike the top note on the keyboard (C8)
3. Power the unit off then on

The unit is now reset.

If the unit won’t come up and permit method 1…

Method 2:

1. 1. Turn down the volume
   2. Turn the unit off
   3. Turn unit on
   4. Press and release the FUNCTION button
   5. Press and release the sixth E flat from the left

Just the POWER and PLAY LED’s should be lit.

1. Press and release the STAGE / ROOM button
2. Let the tests run for 5 minutes
3. Turn the unit off

The MARK 3 is now reset.

Question:
How can I adjust the instruments touch sensitivity?

Answer:

(manual ref. see “Function / Select Mode”.)

To set the keyboard’s “Velocity Sensitivity” parameter:

1. 1. Press the Select button. The button light will illuminate.

1. Per the diagram below, strike a piano note from C#1 to D#2 to select one of the Touch Maps, 1-7:

Map 1 has the greatest dynamic range (allows for harder/heavier playing style). Map 7 has the least dynamic range (allows for easier/lighter playing style). The default selection is Map 4.

The Keyboard Touch setting is retained when the power is off.