KnowledgeBase | X-Pro UP | Quick Access Mode


Setting the Default Program/Setup/QA at Start Up

Question:
How can I select a certain Program/Setup/QA to be the default when I first power up?
and
My instrument powers up with some undesired Program/Setup/QA selection not of my choosing, how can I fix that?

Answer:
All references to the "PC3" apply equally to both the PC3, PC3LE, PC3K and X-Pro models.

The Quick Answer:

  1. From the Program, Setup or QA Mode, select the desired start-up Program/Setup/QA.
  2. Press Master
  3. Press Exit (or Program/Setup/QA) to exit Master Mode.

Done. The Program/Setup/QA you just selected will now be the default start-up selection in each respective mode**.

**PC3, PC3K and X-Pro Users: the one exception is if you have the 'MasterTableLock' parameter (MASTER/MAIN) set to ON. In order for the above to work, the Lock must be on "Off" (factory default).


Understanding the Quick Answer

The PC3 employs something called a Master Table which, much like a polaroid snapshot, remembers your basic system default settings (Master Mode, MIDI Mode incl. MIDI Channel assignments, and Category Favorite selections). See the "Master Mode" chapter in the manual for details.


Need more info? Check out the following links: