KnowledgeBase | SP4-8 | Setup Mode


Advance Through Programs Within a Setup Zone Using a Foot-Switch Pedal

Question:
How can I use a foot-switch to increment through different local programs within a single setup zone?

Answer:

  1. You will need a dual-switch type pedal connected to the "Sustain" input (one side to be used -presumably- for sustain, the other for program switching). An example of such a pedal would be Kurzweil's KFP-2S .

  2. In Setup Mode, select your Setup and press EDIT SETUP.


  3. Press Zone 1, 2, 3 or 4 to select the zone you wish to add this pedal functionality to - for example, here we selected Zone 3.

  4. Using the CHAN/PARAM buttons, navigate to the following FtSw2 parameters and assign as follows:

    • Set FtSw2:Dest to 'ProgInc':

      FtSw2:Dest:ProgInc

      Tip: the easiest way to select this is to type in 136, then press Enter on the keypad.


    • Set FtSw2:Mode to 'Momentary':

      FtSw2:Mode:Moment


    • Set FtSw2:Entry: to 'None':

      FtSw2:Entry:None


    • Set FtSw2:Exit: to 'None':

      FtSw2:Exit:None


    • Set FtSw2:OnVal: to '127':

      FtSw2:OnVal:127


    • Set FtSw2:OffVal: to '0':

      FtSw2:OffVal:0

  5. Press SAVE twice to re-save this Setup as usual. Done.

Usage Notes:

  • The way this will operate is with each pedal press the current Program will increment up to the next program ID. So this will mean having the desired programs lined up sequentially in the Program mode User bank as needed such that you are just incrementing up a preestablished list. To learn how to move Programs around in User memory, be sure to see the tutorial "Deleting and Moving Programs/Setups in User Memory".

  • There is also corresponding 'ProgDec' option (decrement) to permit moving backwards through the Program list, however since the SP4 only supports 2 foot-switch pedals you must choose what two switch pedal functions are a priority. You could give up sustain pedal and use one pedal for Increment and one for Decrement but that is not a trade most would want to make.


Need more info? Check out the following links: