KnowledgeBase | SP2 | Setup Mode


Disable Pitch Wheel

Question:
How Can I disable the Pitch Wheel?

Answer:

PROGRAM MODE

The following will turn off the Pitch Wheel, globally, in Program Mode.

  1. Press + hold the KNOB MODE button and at the same time move the Pitch Wheel.
    The display will show "Wheel 1" (UH1):

    UH1


  2. Release the KNOB MODE button.
    The display will show "Enabled" (En):

    En


  3. Press either the ( -/No ) or ( +/Yes ) buttons beneath the display.
    The display will show "Disabled" (diS):

    diS


  4. Press KNOB MODE to exit.

  5. Press STORE.

  6. Press PROGRAM.
    The display will show "Internal?" (In?):

    In?


  7. Press ( +/Yes ) to confirm.

SETUP MODE

In Setup Mode, each setup must be edited separately as each is a unique entity and each of the 3 zones within, separately assignable as well.

  1. Select the Setup in question.

  2. Press EDIT.

  3. Select the Setup zone that you wish to disable the Pitch Wheel (press Main, Layer or Split). The display will show "m" (main), "L" (layer) or "P" (split) accordingly.

    For ex., here we have selected the Layer zone:

    L64


  4. Press + hold the KNOB MODE button and at the same time move the Pitch Wheel.
    The display will show:

    UH1


  5. Release the KNOB MODE button.
    The display will show "Enabled":

    En


  6. Press either the ( -/No ) or ( +/Yes ) buttons beneath the display.
    The display will show "Disabled":

    diS


  7. (Optional) Go back to step 3 and repeat for other zones as needed.

  8. When finshed, press STORE.
    The display will show "Save Setup?" (Su?):

    Su?


  9. Press ( +/Yes ) to confirm.


Need more info? Check out the following links: