How can I get the PC3's digital output to work and have it serve as master clock?
All references to the "PC3" apply equally to both the PC3, PC3K and X-Pro models.
|TIP: *you may need an RCA-to-XLR adapter to connect with the receiving device depending on its input connector. If the receiving device only offers an optical input, you'll need a converter.|
*The PC3 supports six possible internal clock rates, ranging from from 44.1 to 192kHz
Variable = output volume will be dependent on the front panel master volume slider
Fixed = volume level is constant, set at full, ignoring the position of the master volume slider.
|NOTE: The signal fed to the digital out always mirrors the Main L & R analog outs (i.e. any signals sent to the Aux outs will not appear in the digital out).|
Need more info? Check out the following links: