Routing Programs to the Auxiliary Outputs
How do I route select programs to the Aux outputs?
By default all factory Programs are routed to the primary, Main L & R Outputs. The PC3, however, features a secondary pair of analog outs named "Auxiliary" (Aux) that you can reroute signals to as needed.
Here are the basic steps for routing an entire program to the Aux/Secondary outputs:
- select desired program (in Program Mode)
- press Edit. You will see something similar to:
- press [<more] 3 times
- press [PROGFX]
- the "Output" routing parameters are in upper right hand corner of display. There are separate controls for the insert effect path and the two Aux Returns. Set all in-use FX busses to "Sec.".
(note in the example here Aux 2 is unused so no need to reroute it)
- Exit and save the program
Need more info? Check out the following links: