Kurzweil MP15 v1.02 Update

8/28/17

Files Included in this Download

Filename	Purpose
MP15_v102_ReadMe.html	This document, detailing installation plus a history of all O/S enhancements.
MP15V102.KUF	System update file.

Requirements

• Mac or PC with USB port
• USB cable

v1.02 Release Notes

1. Initial release.

Installation

Start with the MP15's power off.

1. Press and hold down the TRACK 2 button. Power on the MP15 keeping the TRACK 2 button depressed.


2. On the MP15 screen, you will see a scrolling text displaying:

          "MP15 BOOTLOADER v1.XX"

3. Once this text scrolls by once, the screen will display:

          "RUN MP15"

4. Connect a USB cable between the MP15 and your computer.

   A temporary USB drive representing the MP15 will mount on your computer (the drive icon may appear on your Desktop, under "Devices" (Mac) or under "My Computer" (PC).

5. Press the RHYTHM button once. The screen will display:

          "UPDATE SOFTWARE"

6. Press NEXT(⊕) once. The screen will display:

          "UPDATE"

7. Press NEXT(⊕) again. The screen will display the following:

          "COPY FILE TO..." 

8. On your computer, copy (drag and drop) the "MP15V102.KUF" file to the temporary USB drive.


9. Unmount or "Safely Remove" the drive from your computer.


10. Press NEXT(⊕) again on your MP15 to initiate the update.


11. The screen will display:

           "UPDATING ... "

12. When complete, the screen will display:

           "DONE"

13. Power the MP15 off then back on normally.

The update process is now complete.

-END-